How To Guide To Installing And Maintaining Oak Flooring
As soon as you have decided to buy the Oak wood flooring you need to know some of the vital care that is required at the time of its installation and subsequently also.It is the usage of real wood in the making of Hardwood oak flooring that makes it long lasting and very high priced as well.Thus when this is you first time experience with Oak flooring then it is needless to say that you must make sure to install it correct.
You can choose from various colors of oak wood flooring to install in your home, depending upon your preferences. It is the distinctiveness of the dark colored ones like the red oak flooring and the lighter ones like the white oak that makes it very pricey.Keep in mind that hardwood flooring should be stored in temperatures that it is accustomed too in order for it to maintain its great look the longest.It is necessary that you take care of this flooring before its laying to be placed in a dry and ready for installation as otherwise it will completely spoil you flooring.
You need to take the dimensions of the area where you plan to install the hardwood oak flooring for giving it an accurate installation.It is the strips of floor that gets joined at the corner to the joints. You will need to draw a line so that you can measure out the strips of wood correctly.Ensure to keep a ruler with you to draw the lines precisely.You do not have to install your wood perpendicular, it can be parallel, but perpendicular is the best choice to go with.
Again you have to start drawing the lines at the corners of the boards by making sure that there is a ½ inch space for any additional requirement.You must pick the boards that are a perfect straight at the beginning on the floor base.To begin with the laying of the floor has to be started from the door region.One has to make sure to install it at the place precisely below the door jamb.
It is necessary that the door jambs are removed before the floor is installed so that they do not obstruct the laying while it may not be needed in old homes with high raised doors.3/8? holes will need to be drilled in the face of the oak wood flooring panels so that they can be installed with screws.Once this is done the first row can be installed. You will need 3? deck screws to drill into the pairs for every panel that you lay. If only one desire they can use the pneumatic stapler to affix the floor down after the first row has been finished.
Author is an expert on Solid Oak Flooring and wood flooring.
Related posts: